Already use this email address power tools usa
Ultimate Heavy Duty 5kVA Stepdown Transformer (4kw) 110v yellow for Power tools, Lights or USA Appliances- Super High output Heavy duty 5kVA (4KW) Site stepdown Transformer
- Input 240vAC UK or European Mains power. Resettable circuit breaker
- 2 x 16 Amp and 1 x 32 Amp Socket outlets. 110v 2m Flex
- Max. wattage of lighting that can be used is 1666W
- Size: 315 x 355 x 275mm, Weight: 36Kg
- Wiha Tools 74141 Phillips Dura Power Bit - No. 1 x 50mm by Wiha Tools USA
- ✨【Unique Design】This Drill Mixer Attachment is made with a four-blade spiral stirring design. Mixes materials quickly and evenly. Allows you to sufficiently stir without the mess.
- ✨【Superior Material】Our Mixing Paddle is made of high-quality ABS material. Very strong, reusable, durable, and not easy to break or deform. Suitable for your long-term use.
- ✨【Easy to Carry】The Paint Mixer for Drill is made in a great size of 16.5*3.5cm/6.5*1.4inch. Easy to carry and store. The proper length makes it can achieve great mixing.
- ✨【Easy to Install】Our Paint Mixer Attachment is easy to be installed on your drill. It can mix materials perfectly without bubbles. And is also easy to clean with water.
- ✨【Wide Application】This Resin Mixer Attachment can be widely applied for mixing paint, epoxy resin, ceramic glaze, stain, or other thin and thick liquids. Suitable for various drills.
- ❤ Sturdy Material: The Epoxy Mixer Attachment is made of durable material that won't bend or break during use. This is perfect for your paint job or resin craft project.
- ❤ Strong Stirring: Compared with traditional stirring methods, the Epoxy Mixing Paddle adopts a spiral 5-blade design, which makes the mixing of epoxy resin easier and more uniform.
- ❤ Reduce Bubbles: The Epoxy Mixer Paddle allows you to mix as little air as possible during the mixing process. It minimizes the addition of air bubbles to your mix.
- ❤ Wide Range of Applications: Epoxy Mixer Paddle can be used not only for mixing resins but also for mixing thick liquids such as paints, ceramic glazes, colorants, etc.
- ❤ Easy to Use: Installation of the Paint Mixer Drill Attachment is very simple, but requires attention to tighten the drill bit. It is recommended to mix 4 oz or 8 oz of liquid for better blending.
- Input: 100-260v
- Charging protection: The charger has built-in circuit protection to prevent overheating, short circuits, over charging and detecting damaged batteries.
- GSR 7.2-1 GSR 7.2-2 GSR 9.6-1 GSR 9.6-2 GSR 12-1 GSR 12-2 GSR14.4-1 GSR 14.4-2(Power tools battery for7.2v-18v)
- Replacement for bosch 7.2 va 14.4 v power tools rechargeable battery charger (replacement products, not original products)
- If you have any questions or concerns, please contact us, we will give you satisfactory service.
- The digital LCD screen shows clear crisp number readings. Connecting load end to the battery providing real‑time battery charging reading.
- Digital LCD screen gives clear crisp number readings. The product has extremely low power consumption, which is more efficient than almost any LED meter. It acts like a wire so doesn't affect model's performance
- Handles up to 100 amps intermittently and 50 amps continuous duty.
- Connecting load end to the battery provides real‑time battery charging reading.
- Handles 0 to 60 volts. Works on 12, 24, 36, and 48 volt battery bank systems.
- Using advanced manufacturing technology, made of high quality materials, it has long-term use.
- The holes are neat, flat and without broken edges, and no vibration occurs.
- The cutting resistance is small, the drilling speed is increased, and the chips are easily taken out.
- It can be used for opening holes in various wood, wood products, plastics, plywood and other materials.
- The product is easy to install, easy to use. Just install it in a normal hand drill. The work noise is small.
- Utilises Evolution multipurpose cutting technology, optimised to cut mild steel, non-ferrous metals, wood and plastic with one blade
- Double bevel facility reduces the need to re-adjust the work piece and laser guidance aids accuracy
- Large 320 mm slide mechanism for long angled cuts, offers a solution to almost all common applications
- 255 mm RAGE multipurpose blade (28 teeth) included
- 3-year warranty (only valid if purchased in the UK)
- Multi-material: Japanese tungsten carbide tipped (TCT) blade included cuts steel, aluminium, wood with embedded nails, plastic and more
- Powerful: 1200 W optimised gearbox and blade system, increases motor and blade life to cut through a variety of materials with ease
- Accurate: Precision cutting with 0-45 Degree bevel and 45-45 Degree mitre settings, 125 x 55 maximum cross cut capacity
- R210-TCT multi-material blade (24 teeth) included
- 3 years limited warranty (only valid if purchased in the UK)
- Multi-material: Japanese tungsten carbide tipped (TCT) blade included cuts steel, aluminium, wood with embedded nails, plastic and more
- Powerful: 2000 W optimised gearbox and blade system, increases motor and blade life to cut through a variety of materials with ease
- Accurate: Precision cutting with laser guidance, trench cut facility, 300 mm slide, 0 degrees to 45 degrees bevel and 50 degrees to 50 degrees mitre settings, covers all common cutting angles
- R255-TCT multi-material blade (28 teeth) included
- 3 years limited warranty (only valid if purchased in the UK)
- Wave Length (Newton metre) : 650
- ▲【Efficient and Powerful Motor】 - The 1500W, 4500 RMP Motor and 210mm (8-1/2'') blade deliver great power, durability and professional cuts; Cutting depth can be adjusted for grooving and trenching. The reciprocating stroke can ups to 200mm, cutting width is ups to 300mm, providing more possibility to your cutting.
- ▲【Maximum Cutting Capacity】 - Allows for Square cuts, Bevel cuts and Compound cuts, maximum cutting capacity: (0° x 0° - 60 x 300mm) / (0° x 45° - 60 x 210mm) / (45° x 0° - 35 x 300mm) / (45° x 45° - 35 x 210mm), which can adapt to cutting work in a variety of occasions.
- ▲【24T TCT Blade & Smaller Capacity】 - Ultra high grade 210mm 24 Tooth tungsten carbide tipped blade allows to cut wood, soft metal, plastics, and etc with ease; With 14.4 lbs weight only, to facilitate maneuverability and easier transport.
- ▲【Ergonomic Design】 - Super efficient dust collection system captures large amount dust; Large table for better material support with vice clamping system to secure work piece; Cam-lock with mitre detent override; the locking device, securing the machine head at a lower position, conveniently to carry, safer to work.
- ▲【Package Contents】TACKLIFE PMS01X Mitre Saw, 24 Tooth TCT blade, Carbon brush, Extension rods, Allen wrenches(To change the saw blade easily), Dust bag, Clamping device, a pair of AAA battery, User Manual, Email: support@tacklifetools.com. Operation Video: https://www.youtube.com/watch?v=ManU7hpvVyw&feature=youtu.be
- Multi-material - Japanese tungsten carbide tipped (TCT) blade included cuts steel, aluminium, wood with embedded nails, plastic and more
- Powerful - 1500 W optimised gearbox and blade system, increases motor and blade life to cut through a variety of materials with ease
- Accurate - Precision cutting with laser guidance, trench cut facility, 230 mm slide, 0-45 Degree bevel and 50-50 Degree mitre settings, covers all common cutting angles
- R210-TCT multi-material blade (24 teeth) included
- 3 years limited warranty (only valid if purchased in the UK)
